> Pump Suct. Size: DN20 (3/4 inch) to DN200 mm
> Pump Disc. Size: DN15 (1/2 inch) to DN150 mm
> Capacity Q: Capacities to 350 m3/h
> Head H: Heads to 55 m
Product Standard: ISO5199
GENERAL DESCRIPTION:
The pump series single stage end-suction centrifugal pumps is based on new technology, the pump is successfully design based on long-term technology accumulation and on the experience of domestic and overseas advanced technology.
The casing is end-suction and radial discharge design. Its discharge centerline and shaft are in the same vertical plane.
The pump is back-pull-out design, which allows disassembling the casing cover and rotary components without removing the pipe. The mounting frame is supplied with two ball bearings, lubricate by grease or engine oil.
The pump are Stainless steel horizontal centrifugal pump. SEMI-OPEN Impeller or Close type impeller are designed.
